Lancer Evolution L4-2.0L Turbo (4B11T/C) (2010)
1. Set the special tool MB992226 to the pulley.
2. Set the closed wrench to the hexagonal area of the special tool MB992226.
3. Insert the hexagonal bit socket having width across flats of 10 mm into the hexagonal area of the rotor shaft.
4. Hold the pulley with the closed wrench. Rotate the rotor shaft clockwise to remove the pulley.
[[B]] FRONT BRACKET REMOVAL
CAUTION: Do not insert the screwdriver blades too deep. Doing so could damage the stator coil.
Insert the blades of screwdrivers between the front bracket and stator core, and pry and separate them with the screwdrivers.
[[C]] STATOR / REGULATOR ASSEMBLY REMOVAL