Lancer Evolution L4-2.0L Turbo (4B11T/C) (2010)
/Page-1149005.png)
NO : Replace the steering wheel audio remote control switch.
STEP 3. Check clock spring connector C-202 and C-205 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Are clock spring connector C-202 and C-205 in good condition?
YES : Go to Step 4.
NO : Repair or replace the damaged component(s).
STEP 4. Check the clock spring.
Check whether the clock spring is in good condition (Refer to Driver's air bag module and clock spring). See: Restraint Systems/Air Bag Systems/Air
Bag/Testing and Inspection
Q: Is the check result normal?
YES : Go to Step 5.
NO : Replace the clock spring.
STEP 5. Check radio and CD player connector C-107 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is radio and CD player connector C-107 in good condition?
YES : Go to Step 6.
NO : Repair or replace the damaged component(s). The steering remote control switch should work normally.
STEP 6. Check the wiring harness between radio and CD player connector C-107 (terminal 22, 32) and clock spring connector C-205 (terminal
2, 3).
NOTE: Also check intermediate connector C-32 for loose, corroded, or damaged terminals, or terminals pushed back in the connector. If intermediate
connector C-32 is damaged, repair or replace the connector.
-
Check the communication lines for open and short circuit.
Q: Is the wiring harness between radio and CD player connector C-107 (terminal 22, 32) and clock spring connector C-205 (terminal 2, 3) in good
condition?
YES : Go to Step 7.
NO : The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary.
STEP 7. Check steering remote control switch connector C-213 for loose, corroded or damaged terminals, or terminals pushed back in the
connector.
Q: Is steering remote control switch connector C-213 in good condition?
YES : Go to Step 8.
NO : Repair or replace the damaged component(s). The steering remote control switch should work normally.
STEP 8. Check the wiring harness between steering wheel audio remote control switch connector C-213 (terminal 2, 4) and clock spring
connector C-202 (terminal 5, 4).
-
Check the communication lines for open and short circuit.
Q: Is the wiring harness between steering remote control switch connector C-213 (terminal 2, 4) and clock spring connector C-202 (terminal 5, 4) in
good condition?
YES : Go to Step 9.
NO : The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
