Lancer Evolution L4-2.0L Turbo (4B11T/C) (2010)
Using the torx wrench (T30), remove the driver's air bag module.
[D] STEERING WHEEL ASSEMBLY REMOVAL
1. Position the steering wheel in a straight ahead position.
CAUTION
^
Use the special tool to remove the steering wheel since the steering column collision adsorbing mechanism may be damaged.
2. Use special tool MB990803 to remove the steering wheel.
INSTALLATION SERVICE POINTS
[A] STEERING WHEEL ASSEMBLY/DRIVER'S AIR BAG MODULE INSTALLATION
After centering the clock spring, install the steering wheel assembly.
[B]DRIVERS AIR BAG MODULE CONNECTOR CONNECTION/STEERING SWITCH CONNECTOR CONNECTION/HORN
CONNECTOR CONNECTION
Connect the connector securely and route the harnesses not to lie off the cover hole.