Lancer Evolution L4-2.0L Turbo (4B11T/C) (2010)
/Page-1180001.png)
Suspension Strut / Shock Absorber: Removal and Replacement
Front Suspension
STRUT ASSEMBLY
REMOVAL AND INSTALLATION
CAUTION
The part indicated by * is the bolt/nut with friction coefficient stabilizer. During removal, ensure there is no damage, clean dust and soiling
from the bearing and thread surfaces, and tighten it to the specified torque.
Post-installation Operation
Removal Steps 1-6
INSTALLATION SERVICE POINT
[A] KNUCKLE AND STRUT CONNECTION NUT INSTALLATION
