Lancer Evolution L4-2.0L Turbo (4B11T/C) (2010)
Leave the ignition switch in the LOCK (OFF) position until the key interlock cable installation is completed.
1. Move the shift lever to the P position, and turn the ignition switch to the LOCK (OFF) position.
2. Install the tip of key interlock cable to the lock cam pin of shift lever assembly, using a caution not to twist the inner cable.
3. Install the adjuster case with its lock guide pulled up (unlocked).
4. With the lock cam pin pushed in the direction B as shown in the figure to remove the slack from the key interlock cable, securely lower the lock
guide and lock it.
NOTE: The lock position of the key interlock cable is automatically adjusted by a spring.