Lancer Evolution L4-2.0L Turbo (4B11T/C) (2010)
/Page-886008.png)
k. The CAN database screen will display.
Confirm the database number at the top right of the table is N11011 or higher.
If more than one row is displayed in the table, select the appropriate ECM part number.
Lancer Evolution 8631A040
Lancer & Sportback Ralliart 8631A235
Click on the check mark to continue.
l.
Click on the check mark to begin reprogramming. It may take up to 5 minutes to complete the reprogramming.
!!CAUTION!!
The Daytime Running Lights and both the engine and condenser fans will automatically be turned on during reprogramming. Care should be
taken to insure nothing gets caught in the moving blades. The radio will be turned off, instrument warning lights will illuminate and you will
also hear a chime in the interior for a short period of time. These are normal conditions.<
m. This message will display when the reprogramming is successfully completed. Record the S/W (Software) Part No. and compare it to the "New
Software P/N" in the table.
n. Turn the ignition key/knob to the OFF position, wait approximately 8 seconds, then turn it back on.
Click the check mark and you will be returned to the "ECU Reprogramming" page.
