Lancer Evolution L4-2.0L Turbo (4B11T/C) (2010)
^ Turn the VCI power switch ON. Verify that the indicator lamp in the upper right corner of the screen is green.
AWC ECU Reproramming Procedure
1. Conduct the following steps to reprogram the AWC ECU.
a. Turn the ignition key or knob (F.A.S.T. equipped) to the ON position. If the vehicle is equipped with the F.A.S.T. System, the fob must remain in
the vehicle for the entire procedure.
b. In the MEDIC main page, click on MUT-III.
c. Select "Special Function."
d. Select "ECU reprogramming."