mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Drivetrain Controls - MIL ON/DTC C161E Set|Page 3916 > < Drivetrain Controls - MIL ON/DTC C161E Set|Page 3914
Page 9
background image

Click on the "Home" icon at the bottom left of the screen.

2. Disconnect the MUT-III and the battery charger.

3. Start the engine and check for the "SERVICE REQUIRED" warning light. If the light stays on after the self-check, check for DTCs. Refer to the

service manual for appropriate DTC troubleshooting procedures.

WARRANTY INFORMATION

This bulletin is supplied as technical information only and is not an authorization to repair. If an affected vehicle is reported with the described condition,
diagnose the condition, repair as described in this bulletin and submit a normal warranty claim using the following information.

AWC ECU Reprogramming for DTC C0161

Nature Code: 605

Cause Code: 990

Labor Operation No.228511 BQ Time Allowance: 0.3 hr.

Warranty Coverage: 8 years / 80,000 miles Emissions warranty

Drivetrain Controls - MIL ON/DTC C161E Set|Page 3916 > < Drivetrain Controls - MIL ON/DTC C161E Set|Page 3914