mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2437 > < Initial Inspection and Diagnostic Overview|Page 2435
Page 84
background image

STEP 13. Check power window main switch connector E-05 and front power window sub-switch (RH) connector E-14 for damage.

Q: Are power window main switch connector E-05 and front power window sub-switch (RH) connector E-14 in good condition?

YES: Go to Step 14.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. When the front power window sub-switch (RH) is operated, the front
power window (RH) should open or close normally.

Initial Inspection and Diagnostic Overview|Page 2437 > < Initial Inspection and Diagnostic Overview|Page 2435