Lancer LS L4-2.0L SOHC (2002)
STEP 14. Check position light (RH) connector A-24 for damage.
Q: Is position light (RH) connector A-24 in good condition?
YES: Go to Step 15.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the position light (RH) illuminates normally.
STEP 15. Check the wiring harness between position light (RH) connector A-24 and ground.
Q: Is the wiring harness between position light (RH) connector A-24 and ground in good condition?
YES: Replace the position light socket (RH). Check that the position light (RH) illuminates normally.
NO: Repair the wiring harness. Check that the position light (RH) illuminates normally.