Lancer Sportback L4-2.4L (4B12) (2010)
![background image](/mitsubishi/lancer_sportback/l4-2.4l_(4b12)/Page-324005.png)
5. With the timing chain tension side guide spread, hook the special tool MB992103 over the hexagon part of the camshaft on the exhaust side, and
turn the camshaft clockwise to apply slack to the timing chain between the camshaft sprockets.
[D] FRONT CAMSHAFT BEARING CAP REMOVAL
Loosen the front camshaft bearing cap mounting bolts in the order of number shown in the figure, and remove the front camshaft bearing cap.
[E] OIL FEEDING CAMSHAFT BEARING CAP/CAMSHAFT BEARING CAP/THRUST CAMSHAFT BEARING CAP REMOVAL
CAUTION
When the camshaft bearing cap mounting bolts are loosened at once, the mounting bolts jump out by the spring force and the threads are
damaged. Always loosen the mounting bolts in four or five steps.
Loosen the camshaft bearing cap mounting bolts in the order of number shown in the figure in four or five steps, and remove the camshaft bearing
caps.