Lancer Sportback L4-2.4L (4B12) (2010)
![background image](/mitsubishi/lancer_sportback/l4-2.4l_(4b12)/Page-324009.png)
^
When installing the camshaft and camshaft sprocket assembly (exhaust side), be careful not to let the camshaft bearing which is installed to the
front cam bearing cap deviate from its position.
1. When replacing the camshaft bearing, according to the identification mark of front camshaft bearing cap in the table below, select a camshaft
bearing with the corresponding size. Note that the identification mark of camshaft bearing is stamped on the place shown in the figure.