mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2158 > < Initial Inspection and Diagnostic Overview|Page 2156
Page 24
background image

3. Diagnose CAN bus lines, and check if the scan tool screen is as shown in the illustration.

Q: Does the scan tool screen correspond to the illustration?

YES : The trouble can be an intermittent malfunction. (Refer to How to use Troubleshooting/inspection sevice points - How to cope with
Intermittent Malfunction).

NO : Replace the ETACS-ECU.

Diagnostic Item 4

DIAGNOSTIC ITEM 4: Diagnose shorts in the ground to CAN-C bus line.

Initial Inspection and Diagnostic Overview|Page 2158 > < Initial Inspection and Diagnostic Overview|Page 2156