Lancer Sportback L4-2.4L (4B12) (2010)
![background image](/mitsubishi/lancer_sportback/l4-2.4l_(4b12)/Page-572076.png)
OK: Continuity exists (2 ohm or less)
Q: Is the wiring harness between joint connector (CAN3) C-124 and TCM connector C-41 in good condition?
YES : Check the power supply circuit of the TCM. Refer to Troubleshooting. See: Transmission and Drivetrain/Continuously Variable
Transmission/Transaxle/Testing and Inspection/Symptom Related Diagnostic Procedures/Symptom Chart
NO : Repair the wiring harness between joint connector (CAN3) C-124 and TCM connector C-41.
Diagnostic Item 12
DIAGNOSTIC ITEM 12: Diagnose when the scan tool cannot receive the data sent by ECM.
CAUTION: When servicing a CAN bus line, ground yourself by touching a metal object such as an unpainted water pipe. If you fail to do so, a
component connected to the CAN bus line may be damaged.
CAN-C Communication Circuit [Except RALLIART]