Lancer Sportback L4-2.4L (4B12) (2010)
NO : Go to Step 49.
STEP 4. Check the wiring harness between joint connector (CAN1) C-06 and WCM connector C-09 for a short to ground. Measure the
resistance at joint connector (CAN1) C-06.
1. Disconnect joint connector (CAN1), and measure the resistance at the wiring harness side of joint connector (CAN1).
2. Measure the resistance between joint connector (CAN1) terminal 5 and body ground.
OK: 1 kohm or more
3. Measure the resistance between joint connector (CAN1) terminal 16 and body ground.
OK: 1 kohm or more
Q: Do all the resistances measure 1 kohm or more?
YES : Go to Step 5.
NO : Go to Step 50.
STEP 5. Check the wiring harness between joint connector (CAN1) C-06 and SRS-ECU connector C-122 for a short to ground. Measure the
resistance at joint connector (CAN1) C-06.
1. Disconnect joint connector (CAN1), and measure the resistance at the wiring harness side of joint connector (CAN1).
2. Measure the resistance between joint connector (CAN1) terminal 8 and body ground.