Lancer Sportback L4-2.4L (4B12) (2010)
2. Measure the resistance between joint connector (CAN1) terminal 2 and body ground.
OK: 1 kohm or more
3. Measure the resistance between joint connector (CAN1) terminal 13 and body ground.
OK: 1 kohm or more
Q: Do all the resistances measure 1 kohm or more?
YES : Go to Step 12.
NO : Go to Step 57.
STEP 12. Check the wiring harness between joint connector (CAN1) C-06 and ETACS-ECU connector C-301 for a short to ground. Measure
the resistance at joint connector (CAN1) C-06.
1. Disconnect joint connector (CAN1) and ETACS-ECU connector C-301, and measure the resistance at the wiring harness side of joint connector
(CAN1).
2. Measure the resistance between joint connector (CAN1) terminal 6 and body ground.
OK: 1 kohm or more