Lancer Sportback L4-2.4L (4B12) (2010)
/Page-572174.png)
2. Check that there is continuity between joint connector (CAN1) terminals 9 and 22.
OK: No continuity
Q: Is the check result normal?
YES : Go to Step 29.
NO : Go to Step 49.
STEP 28. Check the wiring harness between joint connector (CAN1) C-06 and WCM connector C-09 for line-to-line short. Measure the
resistance at joint connector (CAN1) C-06.
1. Disconnect joint connector (CAN1), and check that there is continuity at the harness side of joint connector (CAN1).
2. Check that there is continuity between joint connector (CAN1) terminals 5 and 16.
OK: No continuity
Q: Is the check result normal?
YES : Go to Step 29.
NO : Go to Step 50.
STEP 29. Check the wiring harness between joint connector (CAN1) C-06 and SRS-ECU connector C-122 for line-to-line short. Measure the
resistance at joint connector (CAN1) C-06.
1. Disconnect joint connector (CAN1), and check that there is continuity at the harness side of joint connector (CAN1).