Lancer Sportback L4-2.4L (4B12) (2010)
Camshaft Position Sensor: Testing and Inspection
Intake Camshaft Position Sensor and Crankshaft Position Sensor
INTAKE CAMSHAFT POSITION SENSOR AND CRANKSHAFT POSITION SENSOR
Required Special Tools:
-
MB991709: Test Harness
-
MB992110: Power Plant ECU Check Harness
Measurement Method
1. Disconnect the intake camshaft position sensor connector, and connect the test harness special tool (MB991709) between the separated connector
(All terminals should be connected).
2. Connect the oscilloscope probe to intake camshaft position sensor connector terminal No. 3.
3. Disconnect the crankshaft position sensor connector, and connect the test harness special tool (MB991709) between the separated connector (All
terminals should be connected).
4. Connect the oscilloscope probe to crankshaft position sensor connector terminal No. 3.