Mirage L4-1597cc 1.6L DOHC Turbo (1989)
-
Using a wrench, hold the camshaft at its hexagon between the No. 2 and No. 3 journals and tighten the bolt to specification.
Caution: Locking the camshaft sprocket with a tool damages the sprocket.
18. INSTALLATION OF AUTO TENSIONER
(1) If the auto tensioner rod is in its fully extended position, reset it as follows:
(a) Keep the auto tensioner level and, in that position, clamp it in the vise with soft jaws.
NOTE: If the plug at the bottom of the auto tensioner protrudes, apply a plain washer as illustrated to prevent the plug from being in
direct contact with the vise.
(b) Push in the rod slowly with the vise until the set hole (A) in the rod is aligned with that (B) in the cylinder.
