Mirage 16L SOHC Turbo Disc Brake Pad Service and Repair Guide
Brake Pad: Service and Repair
Exc. Turbocharged
Fig. 2 Exploded view of disc brake assembly. exc. turbocharged
1.
Raise and support vehicle, then remove wheel.
2.
Remove sleeve bolt, A, Fig. 2, and lift caliper body upward, then support caliper with wire. Lock pin is coated with special grease. Use caution
not to remove grease and ensure no dirt adheres to pin.
3.
Remove inner and outer shim, pad assembly and pad liners from the torque member.
4.
Press piston into cylinder using a suitable tool.
5.
Install pad liners, pad assemblies and inner and outer shim onto the torque member.
6.
Lower caliper body into position, then install sleeve bolt A. Torque bolt to 16-23 ft. lbs.
7.
Install wheel.