Mirage L4-1795cc 1.8L SOHC 16 Valve (1995)
8. Remove piston and connecting rod in numbered sequence shown in Fig. 22, marking large end of each connecting rod with cylinder number.
9. Reverse procedure to install, noting following:
Fig. 23 Piston Pin & Ring Installation
a. Arrange piston ring oil gaps and piston as shown in Fig. 23.
b. Use suitable thread protectors on connection rod studs prior to installation.
c. Mate each connecting rod marking with appropriate cylinder.
d. Install connecting rod bearing cap on connecting rod.
e. Coat threads lightly with oil.
f.
Install both nuts finger tight.
g. Alternately tighten each nut to specifications.