Mirage L4-1795cc 1.8L SOHC 16 Valve (1995)
^
1992 Eclipse and 1992 Galant, 4G6 (2.0L)
^
1992 Expo, and 1992 Truck, 4G6 (2.4L)
^
1992-95 Mirage, 4G1 (1.5L) thru May, 1995
^
1992-94 Eclipse, 4G3 (1.8L)
^
1992-96 Truck, 1992-96 Diamante, 1993-96 Diamante Wagon, 1992-96 3000GT, and 1992-96 Montero, 6G7 (3.0L)
^
1994-96 Montero, 6G7 (3.5L)
To install non-elastic cylinder head bolts, torque all bolts in the sequence given in the chart: on Page 3. Take three steps to attain the specified torque.
(For torque values, see the chart below.) For example, if the final torque is to be 73 Nm, tighten the bolts to 25 Nm in the first sequence, 50 Nm in the
second, and finally to 73 Nm.
The 6G7 DOHC 3.0L Turbo engine contains an additional step, as indicated in the chart.
Cylinder Head Bolt Tightening Torque for Non-Elastic Bolts
Tightening Sequences for Non-Elastic Cylinder Head Bolts
Elastic Cylinder Head Bolts
The following models use elastic cylinder head bolts:
^
1995 Mirage, 4G1 (1.5L) after May, 1995
^
1996 Mirage, 4G1 (1.5L)