Mirage L4-1795cc 1.8L SOHC 16 Valve (1995)
Camshaft Position Sensor: Testing and Inspection
Federal
MEASUREMENT METHOD
1. Disconnect the distributor connector and connect the special tool (test harness: MB991348) in between. (All terminals should be connected.)
2. Connect the analyzer special patterns pickup to distributor connector terminal No.4. (When checking the camshaft position sensor signal wave
pattern)
3. Connect the analyzer special patterns pickup to distributor connector terminal No.3. (When inspecting the crankshaft position sensor signal wave
pattern.)
ALTERNATE METHOD (TEST HARNESS NOT AVAILABLE)
1. Connect the analyzer special patterns pickup to ECM terminal No. 68 (When inspecting the camshaft position sensor signal wave pattern.)
2. Connect the analyzer special patterns pickup to ECM terminal No. 69 (When inspecting the crankshaft position sensor signal wave pattern.)
WAVE PATTERN OBSERVATION POINTS
Check to be sure that cycle time T becomes shorter when the engine speed increases.