Mirage Sedan LS L4-1834cc 1.8L SOHC MFI (1999)
1. Remove piston seal with finger tip.
Caution: Do not use a flat-tipped screwdriver or other tool to prevent damage to inner cylinder.
2. Clean piston surface and inner cylinder with trichloroethylene, alcohol or specified brake fluid.
Specified brake fluid: DOT3 or DOT4
REASSEMBLY
REASSEMBLY SERVICE POINT
>A< LOCK PIN/GUIDE PIN INSTALLATION
Install the lock pin and guide pin so that the pin head marks correspond to the identification marks on the caliper body.
INSPECTION
-
Check cylinder for wear, damage or rust.
-
Check piston surface for wear, damage or rust.
-
Check caliper body or sleeve for wear.
-
Check pad for damage or adhesion of grease, check backing metal for damage.
With 14 Inch Front Disc Brake