Mirage Sedan LS L4-1834cc 1.8L SOHC MFI (1999)
>B<
SNAP RING INSTALLATION
Install the snap ring so that the tapered surface is to the outside.
>C<
ARMATURE PLATE INSTALLATION
Align the mating mark of the crankshaft spline and the mating mark of the armature plate, and then fit them together.
>D<
NUT INSTALLATION
Use the special tool to hold the magnet clutch, and tighten the nut in the same manner as removal.
>E<
AIR GAP ADJUSTMENT
Check whether or not the air gap of the clutch is within the standard value.
Standard value: 0.3 - 0.5 mm (0.012 - 0.020 in.)
NOTE: If there is a deviation of the air gap from the standard value, make the necessary adjustment by adjusting the number of shims.