Mirage Sedan LS L4-1834cc 1.8L SOHC MFI (1999)
After making mating marks on the radiator hose and the hose clamp, disconnect the radiator hose.
INSTALLATION SERVICE POINTS
>A< O-RING INSTALLATION
Insert the O-ring to the water inlet pipe assembly, and coat the outer circumference of the O-ring with water or engine coolant.
CAUTION: Do not allow engine oil or other greases to adhere to the O-ring
>B< THERMOSTAT CASE ASSEMBLY INSTALLATION
Squeeze out the sealant from the tube evenly and apply it so that there is not too much sealant and no places without sealant.
Specified Sealant: Mitsubishi Genuine Parts No. MD970389 or equivalent
>C< RADIATOR LOWER HOSE CONNECTION
1. Insert each hose as far as the projection of the water inlet fitting.
2. Align the mating marks on the radiator hose and hose clamp, and then connect the radiator hose.
INSPECTION
WATER PIPE AND HOSE CHECK
Check the water pipe and hose for cracks, damage and clogs. Replace them if necessary.
