mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

PCM - DTC P0120 TP/Engine Surge/Sag|Page 3437 > < PCM - DTC P0120 TP/Engine Surge/Sag
Page 2
background image

10.

Select MFI, and press "YES".

11.

If the PCM has already been reprogrammed, the MUT-II will display this screen.

NOTE:

The MUT-II will first display a "SUM CHECKING" message for a few seconds, indicating that the scan tool is verifying the ROM-ID.

It this screen is displayed. STOP! Do not continue with this procedure.

12.

If the PCM is unable to be reprogrammed, the MUT-II will display this screen.

NOTE

The MUT-II will first display a "SUM CHECKING" message for a few seconds, indicating that the scan tool is verifying the ROM-ID.

Verify that the correct ROM pack is installed. If the correct ROM pack is installed. and this screen is displayed. replace the PCM. Record this MUT-II
screen information and the ROM pack database number on the repair order.

PCM - DTC P0120 TP/Engine Surge/Sag|Page 3437 > < PCM - DTC P0120 TP/Engine Surge/Sag