Mirage Sedan LS L4-1834cc 1.8L SOHC MFI (1999)
SRS Control Unit: Service and Repair
CAUTION
1. Never attempt to disassemble or repair the SRS-ECU. If faulty, replace it.
2. Do not drop or subject the SRS-ECU to impact or vibration.
If denting, cracking, deformation, or rust are discovered in the SRS-ECU, replace it with a new SRS-ECU. Discard the old one.
3. After deployment of an air bag, replace the SRS-ECU with a new one.
4. Never use an ohmmeter on or near the SRS-ECU, and use only the special test equipment described.
Pre-removal operation
Turn the ignition key to the "LOCK" position.
Remove Floor Console.
Removal
1. Negative (-) Battery Cable Disconnection
Disconnect the negative battery cable from the battery and tape the terminal.
CAUTION: Wait at least 60 seconds after disconnecting the battery cable before doing any further work.
2. Remove ABS-ECU <Vehicle with ABS>
3. Remove SRS-ECU
Installation
