mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Evaporator Temperature Sensor / Switch|Service and Repair|Page 340 > < Diagram Information and Instructions|Page 336
Page 1
background image

Evaporator Temperature Sensor / Switch: Service and Repair

REMOVAL AND INSTALLATION

REMOVAL SERVICE POINT 

<A>

SUCTION HOSE, DISCHARGE PIPE DISCONNECTION
Plug the disconnected hose and the evaporator nipple not to let foreign matter get into them.

CAUTION:  Seal the hoses completely, otherwise the compression oil and receiver will absorb water vapor easily.

INSTALLATION SERVICE POINT

>A<

EVAPORATOR INSTALLATION
When replacing the evaporator; refill it with a specified amount of compressor oil and install it (to the vehicle).

Compressor oil: SUN PAG 56
Quantity: 60 cc (2.0 fl.oz.)

Evaporator Temperature Sensor / Switch|Service and Repair|Page 340 > < Diagram Information and Instructions|Page 336