Mirage Sedan LS L4-1834cc 1.8L SOHC MFI (1999)
After making a mating mark on the toe-in or camber adjusting bolt, remove the control link and lower arm.
<B>Upper Link And Trailing Arm / Lower Arm And Trailing Arm Disconnection
Support the lower arm with a jack. Then separate the connection.
INSPECTION
Check the bushing for wear and deterioration. Check the control link upper link and lower arm for bends or breakage. Check all bolts for condition
and straightness.
Lower Arm Bushing Replacement
Use the special tools to drive out the press-fit the lower arm bushing.
NOTE: If the special tool (MB991449) is hard to install, tap it with a plastic hammer.
CAUTION: Because the outside diameter of both edges of the bushing are different, be careful not to mistake the direction when driving out and
press-fitting.
