Montero V6-3.8L SOHC (2005)
Using special tool MB991926, remove the accumulator.
<<B>> SECURING THE HBB
Secure the HBB on a vice as shown in the illustration, using spacers and special tool MB991620.
<<C>> SNAP RING/POWER PISTON ASSEMBLY/MASTER CYLINDER PISTON ASSEMBLY REMOVAL
1. Press-in the push rod of the power piston assembly, and remove the snap ring using a precision minus-slot screwdriver or similar tool.
NOTE: If it is difficult to remove the snap ring, push the snap ring from the hole ("A" in the illustration) on the cylinder body.
CAUTION: Pull out the cylinder carefully so that the inner diameter of the cylinder is not damaged.
2. Pull to remove the power piston assembly and the master cylinder piston assembly straight from the body.
