mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 6050 > < Reading and Clearing Diagnostic Trouble Codes|Page 6048
Page 4
background image

2. Measure the voltage between terminal 26 and ground by backprobing.

Q: Is the voltage approximately 12 volts (battery positive voltage)?

YES: Go to Step 7. 

NO: Go to Step 5.

STEP 5. Check RV meter connector D-07 for loose, corroded or damaged terminals, or terminals pushed back in the connector.

Q: Is RV meter connector D-07 in good condition?

YES: Go to Step 6.

NO: Repair or replace it. Refer to Harness Connector Inspection. The RV meter should work normally.

Reading and Clearing Diagnostic Trouble Codes|Page 6050 > < Reading and Clearing Diagnostic Trouble Codes|Page 6048