Montero V6-3.8L SOHC (2005)
STEP 11. Check the wiring harness between power window relay connector D-219 (terminal 4) and power window main switch connector H-05
(terminal 10).
NOTE: Also check junction block connector D-208 and intermediate connector D-25 for loose, corroded or damaged terminals, or terminals pushed
back in the connectors. If junction block connector D-208 or intermediate connector D-25 is damaged, repair or replace the damaged component(s) as
described in Harness Connector Inspection.
Q: Is the wiring harness between power window relay connector D-219 (terminal 4) and power window main switch connector H-05 (terminal 10) in
good condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the power windows function should now work normally.
STEP 12. Check ETACS-ECU connector D-222 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is ETACS-ECU connector D-222 in good condition?
YES: Go to Step 13.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. Verify that the power windows function should now work normally.
