Montero V6-3.8L SOHC (2005)
STEP 1. Check power window main switch connector H-05 for loose, corroded or damaged terminals, or terminals pushed back in the
connector.
Q: Is power window main switch connector H-05 in good condition?
YES: Go to Step 2.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the front power window sub-switch (RH)
should now work normally.
STEP 2. Check each switch on the power window main switch for continuity.
1. Remove the power window main switch.