mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2089 > < Initial Inspection and Diagnostic Overview|Page 2087
Page 163
background image

STEP 9. Check the sunroof switch.

Q: Does the check above meet the values in the table?

YES: Go to Step 10.

NO: Replace the sunroof switch. The sunroof function should now work normally.

STEP 10. Check the ground circuit to the sunroof switch. Test at sunroof switch connector F-01.

1. Disconnect the sunroof switch connector F-01 and measure at the harness side.

Initial Inspection and Diagnostic Overview|Page 2089 > < Initial Inspection and Diagnostic Overview|Page 2087