Montero V6-3.8L SOHC (2005)
Q: Is windshield wiper motor connector B-12 in good condition?
YES: Go to Step 4.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the windshield wiper works normally.
STEP 4. Check the windshield wiper motor.
1. Disconnect windshield wiper motor connector B-12.
2. Connect a battery to the windshield wiper motor as shown. Then check the windshield wiper motor operates normally at high and low speeds.
Q: Does the windshield wiper motor operate normally?
YES: Go to Step 5.
NO: Replace the windshield wiper motor. Verify that the windshield wiper works normally.
STEP 5. Check the ground circuit to the windshield wiper motor. Test at windshield wiper motor connector B-12.
1. Disconnect windshield wiper motor connector B-12 and measure the resistance available at the wiring harness side of the connector.