Montero V6-3.8L SOHC (2005)
Q: Is windshield washer motor connector A-33 in good condition?
YES: Go to Step 5.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the windshield washer works normally.
STEP 5. Check the windshield washer motor.
1. Disconnect windshield washer motor connector A-33, and check at windshield washer motor connector side.
2. Fill the windshield washer tank with washer fluid.
3. Connect windshield washer motor connector terminal 1 to the positive battery terminal, and terminal 2 to the negative battery terminal,
respectively. Washer fluid should spray out.
Q: Does the windshield washer motor operate normally?
YES: Go to Step 6.
NO: Replace the windshield washer motor. Verify that the windshield washer works normally.
STEP 6. Check the ground circuit to the windshield washer motor. Test at connector A-33.
1. Disconnect windshield washer motor connector A-33 and measure the resistance available at the wiring harness side of the connector.