Montero V6-3.8L SOHC (2005)
STEP 14. Check the wiring harness between position light (LH) connector A-18 (terminal 1) and ground.
Q: Is the wiring harness between position light (LH) connector A-18 (terminal 1) and ground in good condition?
YES: Replace the position light socket (LH). Verify that the position light (LH) illuminates normally.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the position light (LH) illuminates normally.
STEP 15. Check front-ECU connector A-07X for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is front-ECU connector A-07X in good condition?
YES: Go to Step 16.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the position light (LH) illuminates normally.