Montero V6-3.8L SOHC (2005)
NO: Go to Step 2.
STEP 2. Verify the turn-signal light operation.
Q: Does either of the turn-signal lights illuminate?
YES (illuminates at only one side) : Go to Step 3.
NO (do not illuminate at all) : Go to Step 4.
STEP 3. Check ETACS-ECU connector D-222, junction block connectors D-210, D-212 and D-217 for loose, corroded or damaged terminals, or
terminals pushed back in the connector.
Q: Are ETACS-ECU connector D-222, junction block connectors D-210, D-212 and D-217 in good condition?
YES: Replace the ETACS-ECU. Verify that the turn-signal lights illuminate normally.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the turn-signal lights illuminate normally.
