Montero V6-3.8L SOHC (2005)
Sunroof Motor Assembly (Sunroof-ECU) And SWS Communication Circuit Part 2
CIRCUIT OPERATION
-
Power to the sunroof motor assembly is supplied through fusible links (1) and (4).
-
When the ignition switch (IG2) signal is on, the sunroof motor assembly is ready to operate.
TECHNICAL DESCRIPTION (COMMENT)
The power supply circuit or the communication circuit to the sunroof motor assembly or the sunroof motor assembly may be defective.
TROUBLESHOOTING HINTS
-
The sunroof motor assembly may be defective
-
The wiring harness or connectors may have loose, corroded, or damaged terminals, or terminals pushed back in the connector
DIAGNOSIS
Required Special Tools:
-
MB991223: Harness Set
-
MB991958: Scan Tool (MUT-III Sub Assembly)
-
MB991824: Vehicle Communication Interface (V.C.I.)
-
MB991827: MUT-III USB Cable
-
MB991911: MUT-III Main Harness B
