Montero V6-3.8L SOHC (2005)
2. Connect a battery to the motor terminal, and check that the motor runs freely.
Q: Is the rear power window motor (RH) normal?
YES: Go to Step 35.
NO: Replace the rear power regulator assembly (RH). Verify that the rear power window (RH) function should now work normally.
STEP 35. Check at rear power window sub-switch (RH) connector H-19 in order to check the power window relay circuit of the power supply
to the rear power window sub-switch (RH).
1. Disconnect rear power window sub-switch (RH) connector H-19, and measure at the harness side.
2. Measure the voltage between terminal 6 and ground.
-
The voltage should measure approximately 12 volts (battery positive voltage).
Q: Is the measured voltage approximately 12 volts (battery positive voltage)?
YES: Go to Step 38.
NO: Go to Step 36.