mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Transfer Case > < Fluid - M/T|Capacity Specifications|Page 987
Page 1
background image

Mainshaft Bearing/Bushing: Technical Service Bulletins
M/T - KM145 Rear Bearing Retainer Improved

SUBJECT:

IMPROVED REAR BEARING RETAINER IN KM145 TRANSMISSION
NO.: TSB-89-22-002

DATE:

JUNE, 1989

MODEL:

MONTERO, 4WK TRUCK

PURPOSE This bulletin is to inform you of an improvement in the rear bearing retainer in the KM145 manual transmission found in the 2.6L Montero
and 4WD Truck.

DETAILS OF CHANGE A heat treatment to improve resistance to wear has been applied to the rear bearing retainer beginning December, 1988. The
location of the rear bearing retainer is shown below. If you are replacing the rear bearing retainer on any KM145 transmission, use the new heat treated
one.
PARTS INFORMATION

^

New Part Number: MD734707 (heat treatment added)

^

Old Part Number: MD717089

^

Parts are interchangeable.

Transfer Case > < Fluid - M/T|Capacity Specifications|Page 987