mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Engine Speed Detection Connector <--> [Tachometer Connector] > < Engine - Fouled Spark Plugs Causing Misfire|Page 2237
Page 1
background image

Spark Plug: Testing and Inspection

Check the plug gap and replace if the limit is exceeded.

Standard value: 1.0 - 1.1 mm (0.039 - 0.043 in.)

Limit: 1.3 mm (0.051 in.)

CAUTION:  

1. Do not attempt to adjust the gap of the platinum plug.
2. Cleaning of the platinum plug may result in damage to the platinum tips. Therefore, if carbon deposits must be removed, use a plug cleaner and

complete cleaning within 20 seconds to protect the electrode. Do not use a wire brush.

Engine Speed Detection Connector <--> [Tachometer Connector] > < Engine - Fouled Spark Plugs Causing Misfire|Page 2237