mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2380 > < Initial Inspection and Diagnostic Overview|Page 2378
Page 353
background image

DIAGNOSIS

Required Special Tools:

-

MB991223: Test Harness Set

STEP 1. Check the RV meter.

Q: Does the RV meter work normally?

YES: Go to Step 2.

NO: First, repair the RV meter. Refer to RV meter.

STEP 2. Check RV meter connector D-08 and ETACS-ECU connector D-224 for damage.

Q: Are RV meter connector D-08 and ETACS-ECU connector D-224 in good condition?

YES: Go to Step 3.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. If the RV meter operating sound function works normally, it indicates
that a correct signal is sent from the RV meter switch.

Initial Inspection and Diagnostic Overview|Page 2380 > < Initial Inspection and Diagnostic Overview|Page 2378