Montero Sport V6-3.5L SOHC (2004)
1. Measure at key reminder switch connector D-16 without disconnecting the connector.
2. Check that there is no continuity between key reminder switch terminal No. 4 and each terminal (except terminal No. 6), as well as between key
reminder switch terminal No.6 and each terminal (except terminal No. 4).
Q: Does continuity exist between terminals?
YES: Replace the key reminder switch. If the functions, which are described in "CIRCUIT OPERATION", work normally, the input signal from
the key reminder switch should be normal.
NO: Go to Step 14.
STEP 14. Recheck for malfunction.
Q:Is a malfunction eliminated?
YES: This procedure is complete. (If no malfunctions are found in all steps, an intermittent malfunction is suspected. Refer to How to Use
Troubleshooting/Inspection Service Point - How to Cope with Intermittent Malfunction.)
NO: Go to Step 1.
Inspection Procedure 2
The Ignition Key Hole Illumination Light does not Go Out.