Montero Sport V6-3.5L SOHC (2004)
STEP 7. Check the harness wires between the driver's side door switch connector E-33 (terminal No.2) and ETACS-ECU connector D-11
(terminal No.9).
NOTE: After inspecting intermediate connector E-42, junction block D-14, inspect the wire. If intermediate connector E-42, junction block D-14 are
damaged, repair or replace them. Refer to Harness Connector Inspection.
Q: Are the harness wires between the driver's side door switch connector E-33 (terminal No.2) and ETACS-ECU connector D-11 (terminal No.9) in
good condition?
YES: Replace the ETAS-ECU.
NO: Go to Step 8.
STEP 8. Recheck for malfunction.
Q: Is a malfunction eliminated?
YES: The procedure is complete. (If no malfunctions are found in all steps, an intermittent malfunction is suspected. Refer to How to Use