mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Ignition Switch|Page 3994 > < Ignition Switch|Page 3992
Page 12
background image

1. Remove the ETACS-ECU and measure at the junction block side (connector D-11).

2. Measure the voltage between terminal number 2 and body ground.

-

The measured value should be approximately 12 volts (battery positive voltage).

Q: Does the measured voltage correspond with this range?

YES: Check that the malfunction eliminated.

NO: Go to Step 17.

Ignition Switch|Page 3994 > < Ignition Switch|Page 3992