Montero Sport V6-3.5L SOHC (2004)
STEP 12. Check the harness wires between key reminder switch connector D-16 (terminal No.2 and 6) and ETACS-ECU connector D-11
(terminal No.8 and 12).
NOTE: After inspecting intermediate connector C-72, junction block D-13, inspect the wire. If intermediate connector C-72, junction block D-13 are
damaged, repair or replace them. Refer to Harness Connector Inspection.
Q: Are the harness wires between key reminder switch connector D-16 (terminal No.2 and 6) and ETACS-ECU connector D-11 (terminal No.8 and12)
in good condition?
YES: Replace the ETAS-ECU.
NO: Go to step 13.
STEP 13. Check for continuity between terminals (except terminal No. 4 and No. 6) of key reminder switch connector D-16.