mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 1830 > < Initial Inspection and Diagnostic Overview
Page 1
background image

Accelerator Pedal: Symptom Related Diagnostic Procedures

Inspection Procedure 1

Throttle Valve will not Fully Open or Close

DIAGNOSIS

STEP 1. Check the accelerator cable adjustment.

Q: Is the accelerator cable properly adjusted?

YES: Go to Step 2.

NO: Adjust the accelerator cable and then go to Step 4.

STEP 2. Check the return spring.

Q: Is the return spring damaged or deformed?

YES: Go to Step 3.

NO: Replace, then go to Step 4.

STEP 3. Check the throttle lever.

Q: Is the throttle lever damaged or deformed?

YES: Replace, then go to Step 4.

NO: There is no action to be taken.

STEP 4. Retest the system.

Q: Does the throttle valve fully open and close?

YES: This procedure is complete.

NO: Return to Step 1.

Inspection Procedure 2

Accelerator Pedal Operation is not Smooth (Over Acceleration)

DIAGNOSIS

STEP 1. Check the accelerator pedal.

Q: Is the accelerator pedal loose?

YES: Tighten, then go to Step 4.

NO: Go to Step 2.

STEP 2. Check the accelerator cable wiring.

Q: Is the accelerator cable routing bent sharply?

YES: Repair, then go to Step 4.

NO: Go to Step 3.

STEP 3. Check the accelerator cable lubricant.

Q: Is the accelerator cable lubricated sufficiently?

YES: There is no action to be taken.

Initial Inspection and Diagnostic Overview|Page 1830 > < Initial Inspection and Diagnostic Overview