mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Drive/Propeller Shaft|Service and Repair > < Initial Inspection and Diagnostic Overview|Page 2278
Page 2
background image

STEP 2. Check the front propeller shaft snap rings thickness. 

Q: Are they correct? 
YES: Go to Step 3.
NO: Replace the snap ring. Then go to Step 5.

STEP 3. Check the front propeller shaft journal bearings for wear or damage.  

Q: Is wear or damage apparent? 
YES: Replace the journal bearing. Then go to Step 5.
NO: Go to Step 4.

STEP 4. Check the rear propeller shaft for wear or damage. 

Q: Is wear or damage apparent? 
YES: Replace the rear propeller shaft. Then go to Step 5.
NO: Go to Step 5.

STEP 5. Retest the system. 

Q: Is the abnormal noise eliminated? 
YES: The procedure is complete.
NO: Recheck from Step 1.

Drive/Propeller Shaft|Service and Repair > < Initial Inspection and Diagnostic Overview|Page 2278